It’s to be just about three years due to the fact that Smith & Wesson lugged out the 2nd generation that its M&P pistols. This pistols sport improvements—inside and out—over the initial M&Ps, however until currently there was one thing absent from the second-generation lineup: a subcompact.

You are watching: Smith and wesson m&p 9c for sale

The brand-new Smith & Wesson M&P M2.0 Subcompact is offered in 9mm and .40 S&W and with and without a ignorance safety. The 9mm and also .40 versions room identical yet for caliber and also capacity. Over there is also a .45, but that gun is bigger in every dimension. The .45 has a much longer four-inch barrel, 8+1 capacity and also weighs 2.4 ounces more. Every version of the Subcompact, no matter the caliber, is the same price.

I derived a sample of the 9mm version v no thumb safety and security for testing since it is likely to it is in the most popular version. The Subcompact sports a 3.675-inch barrel and a 12-round volume in 9mm (10 rounds in .40).

Other 보다 its abbreviation size, it provides all the exact same features discovered on the Compact and also full-size M&P pistols. These are polymer-frame, striker-fired pistols developed for rigorous use. Both the slide and barrel room stainless steel and also given one Armornite corrosion-resistant finish, and also the pistol is rated because that +P ammunition.


*
The steel three-dot sights are collection in the very same size dovetails as bigger M&Ps, therefore aftermarket sights that fit ahead M&Ps will certainly fit the Subcompact.

Factory traditional sights are steel with 3 dots, and also the Subcompact has actually the same dovetails together the bigger M&Ps so all of the aftermarket sight choices like fiber optics and tritium will certainly fit this pistol together well. The M&P has an 18-degree fixed angle, which in layman’s terms way it’s lot closer come a 1911 than, say, a Glock. It come with four interchangeable backstraps.


With numerous striker-fired pistols you’ll check out a safety lever on the trigger. V the M&P the trigger itself is the pivoting safety lever. Over there is an interior striker safety and security as well. As I mentioned, you can also buy the Subcompact with a hand-operated safety. That lever is ambidextrous and is located at the peak rear of the frame, comparable in place to whereby you’ll find the thumb safety on a 1911.

*
The brand-new M2.0 Subcompact is offered with or without a thumb safety. Unlike first-generation M&Ps, the M2.0 dispenses v the beavertail.

This pistol comes through two 12-round magazines. One has a do the washing up base pad, the other prolonged base pad. With the extended base pad newspaper in place, i can get my entirety hand on the gun, but when making use of the flush base pad, mine pinkie is left hanging. However, the flush base pad is fifty percent an customs shorter, make the total slightly simpler to conceal. I say “slightly” since it is usually the target of the pistol that prints under clothing.

Before us dive deeper right into the details the the pistol, let’s look in ~ the changes and improvements between the first- and second-generation M&Ps. The two biggest have to resolve the cause pull and also the grip.

By far, the two many common varieties of customization excellent to first-generation M&P pistols have been trigger jobs and increasing the texturing that the fixed area, usually through stippling.


First-generation M&Ps have an advertised 6.5-pound pull, which appears to it is in the standard cause pull load for pistols designed to be “service weapons,” together the M&P was. Heavy trigger pulls top top duty guns are often meant to be secondary safety. The only trouble with this is most people buying M&Ps aren’t cops, and the American customer is getting awfully picky as soon as it come to create pulls. Heavy create pulls make it harder to shoot accurately, much less quickly, and also who desires that?

Smith & Wesson engineers took a lengthy look at what to be being excellent to the first-generation M&Ps to improve the create pulls, and also so for the M&P M2.0 they decreased the create pull weight mainly through boosted geometry in the sear and striker. The targeted spec because that the M2.0’s cause pull is 5.5 pounds, and that’s simply what I gained with my check gun. I’ve actually placed a most rounds downrange through assorted sizes that M&P M2.0 pistols, and every cause pull has actually been in ~ a quarter-pound of the 5.5-pound spec.

More than the trigger-pull weight, what a lot of human being didn’t like about the create pull top top the original M&P to be the absence of a discernible reset. Reset shouldn’t issue in a protective pistol. In any kind of self-defense scenario, nobody will certainly be worried about the reset on your trigger; they’ll simply be pulling the as quick as feasible until the problem is solved. Still, S&W engineers addressed the problem, and also the triggers on the M&P M2.0s have an extremely positive reset; you can both hear and also feel it.


Many civilization thought the manufacturing facility texturing top top the grip of the original M&P was too slick. Together a result, hand-stippling was a usual sight. Many thanks to contemporary injection-molding techniques, stippling her M&P M2.0 is no much longer necessary. The factory texturing top top the frame and also backstraps of the M&P M2.0 is as aggressive as stippling, and also that is no exaggeration.

I’ve always carried the gun i shot in USPSA competition and vice versa, and also for years ns avoided stippled grips due to the fact that I thought the stippling would certainly chew through my shirt. Finally, around 10 years earlier I acquired my first stippled grip, and also I will never ever go back.

I lug this up because, together I said, the blacksmith & Wesson frame texturing is together aggressive as hand-stippling, but as with stippling, you will certainly not need to worry about it wearing through your extending garment. However, I would certainly recommend having some class of fabric (a slim T-shirt is every that’s necessary) in between your skin and also the framework of the pistol, or friend will experience what medical specialists term a skin abrasion.

The first-generation M&Ps came with 3 sizes of interchangeable backstraps: small, medium and also large. According to the persons at smith & Wesson, 80 percent of users favor the medium backstrap.

M&Ps have actually never been my very first choice because that a lug gun simply since the pistol never fit my hand properly. The tool backstrap was simply a little too little for me, and the large backstrap add to a tiny bit that meat on the back, yet is mostly simply fatter than the medium, which i didn’t want. The closer a pistol tight is to round, the less naturally that points.

Apparently, ns wasn’t the only human who had this issue. The M&P 2.0 in all sizes comes supplied with not three but four backstraps: small, medium, medium-large and also large.

*
One that the big improvements in the M2.0 is the inclusion of a 4th backstrap: a medium-large. The gun likewise comes through comes with two grip extenders for bigger mags.

The big news here is the medium-large backstrap, which has actually the same girth as the medium but adds a curve in ~ the top to provide much more material under the net of the shooter’s hand to rise reach come the trigger. Top top both the full-size and also Compact M&P M2.0, ns love-love-love the medium-large backstrap, but I to be surprised to find that on the Subcompact the medium backstrap is a far better fit because that me.

That’s the good thing around having 4 sizes of backstraps. They permit you come fit the pistol to her hand as lot as possible. Swapping out backstraps takes all of 10 seconds.

Here is my only complaint around this details pistol. The M&P M2.0 provides the exact same proven magazines together the initial M&P. I’m guessing smith & Wesson has a lot of extended base pads left end from the first-generation S&W M&P Subcompact, due to the fact that the one listed with this pistol walk not have actually that aggressive M2.0 texturing. The expanded base pad feeling a small slick under mine pinkie.

One complain I’ve heard around M&Ps because that a while is the ambidextrous on slide stop. You’ll an alert S&W doesn’t term that a “slide release,” since if you’re a southpaw and shot to release the slide by pushing down on the right-side lever, fuhgeddaboutit. You’ll discover it takes about four times together much force as pushing under on the left-side lever. You’re much far better off simply working the on slide by hand.

You might notification the absence of a beavertail on the framework of the second-generation M&Ps. Blacksmith & Wesson has got rid of the beavertail, so currently the behind of the structure doesn’t yes, really stick out any kind of farther 보다 the rear of the slide. Top top the full-size pistol this makes much less of a distinction than top top this subcompact pistol destined because that a concealed-carry role.

The scalloped serrations in ~ the behind of the on slide haven’t changed, yet with the M2.0 you’ll view S&W has included some minimal serrations at the former of the slide close to the bottom whereby it meets the frame. Ns wish S&W had been willing to move some that the on slide markings to completely serrate the front of the slide, however at the very least the rear serrations room aggressive.

There are tiny cutouts in ~ the bottom of the frame on each side to provide you a little far better grip top top the floorplate that the magazine have to you have to strip one out by hand.

The inner steel chassis inside the polymer framework is much longer on the M2.0 보다 on the original M&P. S&W calls that an “embedded rigid stainless steel chassis,” and it likewise has an Armornite coating. In the first-generation M&P the chassis didn’t expand much previous the front of the create guard, yet on the brand-new model the steel in the structure goes most of the method out to the finish of the frame.

*
The interior stainless steel chassis extends practically all the way to the front of the dust cover, making that stiffer and also therefore even an ext reliable.

On the initial M&P the serial number in the steel chassis might be seen through a window cut right into the polymer at the rear of the frame. In the M2.0 the serial number in the stole chassis is located over the tactical rail, intuitive proof the chassis extends lot farther.

This longer, stiffer structure makes an ext of a distinction on the full-size M&P, ensuring there won’t be any flex if you hang a big weapon light on the frame’s tactical rail. However even through the Subcompact, less structure flex equals greater reliability.

The “loaded-chamber indicator” is simply a hole with the behind of the barrel hood. That is almost useless in anything various other than straight sunlight, however it permits the M&P to be sold in claims that mandate particular safety functions on guns.

I to be lucky enough to reap some serious cause time v the M2.0 in ~ the S&W Academy once the total was very first introduced. In ~ the time, the editor that a significant gun magazine remarked he assumed the new gun must be called the “M&P 1.1” due to the fact that in his opinion there weren’t many transforms to it.

But I’ll respond to that’s because not many things needed to be done to the M&P. Did ns mention any type of changes S&W made come the architecture to improve reliability, i m sorry is the most important element of any defensive firearm? No. They didn’t make any kind of because none required to it is in made. That states a lot.

Range time with the Subcompact lugged no surprises. The fired whatever I fed it and was nicely specific for a subcompact.

*
Notes: Accuracy outcomes are the averages of 4 five-shot teams at 25 yards native a sandbag rest. Velocities room averages of 10 shots measured v an Oehler model 35P 12 feet from the muzzle. Abbreviations: FMJ, complete metal jacket; JHP, jacketed hollowpoint

The M&P Subcompact is lot smaller than the full-size M&P, however it is no a pocket gun, and you will require a holster. That said, it will certainly fit into any holster produced the first-generation M&P Subcompact and conceal under just about any garment.

A great review of this pistol wouldn’t be finish without a comparison come its closest competitor: the M&P Shield. A lot of world think among the reasons why smith & Wesson to be so slow to present a subcompact version of the M&P M2.0 is because of the success that the subcompact Shield. They can be right, however these are far from the same guns.

The M&P Subcompact is the same elevation as the Shield, however it is approximately a half-inch longer, weighs a few ounces more, and also is remarkable thicker. The Subcompact looks and feels like a chunk of a gun compared to the really flat Shield. However, the thickness doesn’t just offer a pretty personality; it provides you substantially more capacity than the Shield.

These pistols space the same height only if the Shield is put on its do the washing up seven-round magazine. Meanwhile, the Subcompact supplies a 12-round capacity. Plus, you have the right to reload the Subcompact with those big sticks intended for the Compact and/or full-size M&P M2.0, which ups your volume to 15 or 17 rounds. Last, the Subcompact has actually the four interchangeable backstraps, i beg your pardon the Shield does not.

If this sounds favor I’m ganging up on the Shield, ns don’t average to. The Shield is certainly easier come conceal and carry than the Subcompact, yet that doesn’t come without a price. The good thing around the Subcompact is the if you’re a fan of the M&P design and wanted a small, concealable pistol, friend now have one much more option.

American consumers have had access to compact 9mm pistols for decades. Ns owned a blacksmith & Wesson 3913 earlier in the so late ’90s, and also the pistols of today are much superior to those firearms of yesteryear.

The smith & Wesson M&P M2.0 Subcompact is a perfect example. Lock have better ergonomics, vastly improved reliability, far better texturing on the grips, far better sights, much better everything. And once you change for inflation, you’ll check out that many thanks to developments in manufacturing, they expense less, too.

See more: Watch Keeping Up With The Kardashians Iced Out ", Keeping Up With The Kardashians Iced Out

SMITH & WESSON M&P M2.0 SUBCOMPACT

TYPE: striker-fired semiauto CALIBER: 9mm Luger (tested), .40 S&W, .45 ACP (larger dimensions than 9mm, .40) CAPACITY: 12+1 BARREL LENGTH: 3.7 in. OAL/HEIGHT/WIDTH: 6.6/4.5/1.2 in. WEIGHT: 24.0 oz. CONSTRUCTION: Armornite-coated stainless stole slide, polymer frame TRIGGER: 5.5 lb. Traction (measured) SIGHTS: 3-dot steel SAFETIES: sear block drop, trigger safety bar (as tested) PRICE: $569

Buy that now. log on to GalleryofGuns.com, choose this firearm, salary a deposit and also it will certainly be in ~ your local gun save in two days. When purchased indigenous GalleryofGuns.com, Davidson’s promises to fix or change this